Saltwater pools are superior to traditional pools in many ways. However, it is very important to understand the differences and not to believe the various myths that are so widely spread. A saltwater pool has a chlorination system to create chlorine using electrolysis.
It converts dissolved sodium chloride that is at least 95% pure to sanitize the water rather than manually adding chlorine. A pool requires a salt chlorinator to convert salt to chlorine and cannot exist without one.
Now we will explain how saltwater chlorination system works in detail and answer the question if you ask “Can I use salt in my pool without a saltwater system?”
- 1 Can I add salt to my pool without a saltwater system?
- 2 Do you have to add salt to a saltwater pool?
- 3 How to add salt to a saltwater pool
- 4 Can you put too much salt in a salt water pool?
- 5 Final words
- 6 FAQs
Can I add salt to my pool without a saltwater system?
To be honest, it is impossible to say that it is permissible to just take and directly add salt to the pool. In order to add salt to your pool, the pool owner will need a certain device called a salt chlorinator for the pool water.
That is how this pool equipment works in salt water pool.
Salt chlorinator control unit
Let’s not complicate everything and use simple words to try to understand what it is. In short, it’s the brain of the device that makes the whole system work properly.
The salt cell is a tubular hard plastic device. When the chlorinator and pump are running together, the salt in the salt water is converted into liquid chlorine through a process called electrolysis.
Water flow sensor
Installed inside the piping, the water flow sensor monitors water flow to ensure that there is always a steady flow running through the salt cell while the pump is running. The salt cell needs to be consistently immersed in water when operational otherwise it can be damaged. If water flow drops below a certain level because of a blockage, air leak, or some other problem, the sensor alerts the system and shuts down the chlorinator until the correct water flow has been restored.
That is what you should do while adding Salt Water Pool as one of the components of entertainment for your leisure.
It is important to check if there are acceptable chemical levels for the salt water pool. So make the water chemistry tests and check:
- alkalinity level
- ph level
- free chlorine level
- cyanuric acid level
- calcium level
- salt level
How much salt do you put in a saltwater pool?
There is such a rule of thumb – the ideal salt level should be between 2700-3400 ppm. 3200 ppm will be ok. Before adding salt to your pool, test the water to check your salt level.
Do you have to add salt to a saltwater pool?
In order to start adding salt to the pool, pool owner need to know some measures. A newly purchased swimming pool brought to you directly from the pool company factory or one that has been emptied and now refilled (ie. the pool liner was replaced, repairs were done on the pool floor) typically requires 200 lbs of salt for every 10,000 gallons of water.
From time to time, you will have to add salt to your pool water again.
How to add salt to a saltwater pool
In order to add salt to your pool, you will have to manually pour salt directly into the pool. Do not pour it into the skimmer, this method will be incorrect. Also here are the materials you can use – crystalized pool salt or water softener pellets.
To make the process as effective as possible, choose a certain place for pouring, namely, in the deep end. After the dissolution process begins, the substance will be sent to the pump, then to the main drainage and to the chlorinator.
Remember! Turning on the pool pump is a very important step in this procedure.
The salt level is a pretty tricky thing. You can make a mistake in the calculations even after you conduct a salt level test for pool chemistry. Everything is actually simpler. It is best to conduct the test a day after you add salt to the water. Then it will definitely dissolve completely and you will be able to evaluate the result clearly.
Speaking of false salt levels tests, we have to immediately warn you that you should not be led to this stupid trick that occurs due to undissolved salt and faulty sal level. It is better to add a little salt and then add more than then think about how to reduce the salt level. So be careful with this action.
Can you put too much salt in a salt water pool?
Yes, of course, such an outcome of events is possible. In most cases, this does not mean anything bad, but in any case, you can only trust the test strips that were carried out 24 hours after pouring salt into the water. If you see a salt level of about 6000 pm, then you need to beware. It may not do you much harm, but your equipment and pool may be exposed to harmful effects, as a result of which they will become unusable.
Let`s summarize. Now you know exactly everything about adding salt to pools.We have sorted out all the nuances, closed a lot of questions that interest you so much, so now you can solve your problems with saltwater pools by yourself.
Can you put chlorine tablets in a saltwater pool?
We will be glad to make you happy with this wonderful news – salt systems is the best solution you could come to, since it does not require suffering with water chemistry, with cleaning the pool, with taking care of algae or bacteria. Salt stabilizes the situation and pool salt system greatly simplifies the maintenance of the pool. So it can serve as a natural disinfectant. For this reason, you may not need chlorine tablets if you already have a salt water chlorine generator.
What happens to the sodium in a saltwater pool?
Electrolysis happens by sending electricity through salt water (sodium chloride, or NaCl), which interacts with the chloride ion in the salt. This creates chlorine in the water, and a very high-pH byproduct called sodium Hydroxide. The now-chlorinated water flows into the pool, and voila!
Can you put salt in a regular pool?
The granulated salt used in a saltwater pool can be as simple as regular table salt, but not the iodized version. A pool that has no salts present in the water needs about 50 pounds of salt added per 2,000 gallons of pool water. The best practice is to test the water before and after adding salt using salt test strips.
How long does pool Salt take to dissolve?
The process will take a day approximately.
What happens if you swim in a shocked pool?
In general, it is not recommended to enter the water of a pool that has just been shocked. We’ll explain why. Shocking, if explained in simple words, is a procedure that aims to create the highest chlorine levels in the water. You know yourself what chlorine can entail, especially in such a large amount. You may get bad chemical reaction, irritated eyes, so it’s worth waiting the whole night with the pump turned on after you shocked the pool after sunset the day before. In the morning, you can enter the water. It will protect you from the bad chemical reaction.